消防水/泡沫軟管站  消防水軟管站

Fire hose station/Fire water(foam) hose station/Fire water hose station

      消防水/泡沫軟管站是一種新型的可固定式滅火裝置，主要用于撲滅固體物質火災和易燃液體類火災。它既可以快速的噴射水，也可以噴射泡沫。軟管站上的軟管可以快速的展開或收攏，并且可以在盤車轉動的狀態下供水或泡沫，操作非常簡便、高效。

       Fire water / foam hose station is a new type of fixed fire extinguishing device, which is mainly used to extinguish solid material fires and flammable liquid fires.It can not only spray water quickly, but also spray foam.The hose on the hose station can be quickly unfolded or folded, and can supply water or foam when the turning gear is rotating. The operation is very simple and efficient.

       消防水/泡沫軟管站廣泛適用于海上鉆井平臺、船舶、碼頭、石油化工企業、油田油庫、加油站、煤炭鋼鐵企業、易燃液體倉庫、鍋爐房等場所。當用于船舶時，還可以噴射水流，對甲板進行沖洗。
       Fire water / foam hose stations are widely used in offshore drilling platforms, ships, wharves, petrochemical enterprises, oil depots, gas stations, coal and steel enterprises, flammable liquid warehouses, boiler rooms and other places. When used in ships, it can also spray water to flush the deck.

      消防水/泡沫軟管站上一般配置的軟管長度為20米，也可以根據需求定制。具體要求可以咨詢我們。

      The hose length generally configured on the fire water / foam hose station is 20 meters, which can also be customized according to needs. Please consult us for specific requirements.

     消防水/泡沫軟管站的流量為：4L/S，8L/S，也可以根據客戶要求定制。

     The flow of fire water / foam hose station is 4L/S, 8L/S, which can also be customized according to customer requirements.

     下面是消防水/泡沫軟管站的結構圖：

消防軟管站結構圖

(Structural drawing of fire hose station)

      消防水/泡沫軟管站如何操作？（ How to operate the fire water / foam hose station?）

      一、只噴射泡沫時如何操作：（How to operate when only foam is sprayed:）

      (1)將消防水管道與軟管站的進口連接好。

       Connect fire hose and inlet of foam hose station.

     (2)將泡沫槍與軟管連接好并將軟管展開。

      Connect the foam gun  to the hose and unfold the hose.

     (3)消防壓力水過來后，打開進液軟管上的手動閥和泡沫槍前的手動閥即可。

      After the fire pressure water comes, open the manual valve on the liquid intake hose and the manual valve in front of the foam gun.

    （4）運行完成后，先將進液軟管上的手動閥關掉，再噴射1min的水將管道沖洗一下。

       After the operation, first close the manual valve on the liquid inlet hose, and then spray water for 1min to flush the pipe.

二、只噴射水時如何操作？（ How to operate when only spraying water?）

      (1)將消防水管道與軟管站的進口連接好。

      Connect fire hose and inlet of foam hose station.

     (2)將水槍與軟管連接好并將軟管展開。

      Connect  water gun to the hose and unfold the hose.

     (3)消防壓力水過來后，打開水槍前面的手動閥即可。

      After the fire pressure water comes, open the manual valve in front of the water gun.